Skip to content
ZJ2

Guard-less Active Shield GAS

1.0.0 1.1.0 1.1.1 1.1.2 1.2.0 1.2.1 1.3.0/1.4.0 1.4.1 1.4.2 1.4.3 Switch 2

Summary

Makes a zonai device fused to a shield/weapon constantly active.

Instructions

1.0.0 1.1.0 1.1.1 1.1.2

  1. Fuse an zonai device that can be activated to a shield
  2. Equip a one-handed weapon and take out a shock emitter
  3. Activate the shock emitter by swinging it with your weapon while holding ZL
  4. Pick up the shield and it should be on Link's back while still being active
  5. (optional) Zuggle the shield to carry GAS through saves

Discovered by Venaticus - June 12 2023

1.0.0 1.1.0 1.1.1 1.1.2 1.2.0 1.2.1 1.3.0/1.4.0 1.4.1 1.4.2 1.4.3 Switch 2

  1. Fuse entangle a zonai device that can be activated to equipment A
  2. Fuse the zonai device to equipment B
  3. Place equipment A inside culling area
  4. Swing/guard with equipment B while equipment A is culled
  5. Uncull equipment A
  6. (optional) Zuggle both equipment A and B to carry GAS through saves

Note

Alternative methods to cull equipment A are also compatible.

Discovered by Zas - June 22 2023

Notes

  • If the equipment that the device is fused to is a weapon, GAS will not consume energy cells
  • Dropping, unequipping, or swinging/guarding with the equipment that the device is fused to will end GAS
  • Can also be performed with ARAZ by fusing a zonai device to a zuggle with an item of the same type equipped, then swinging/guarding with the FE base equipment out of the device's activation range
  • Having a GAS'd equipment attached to Link prevents the "Safe Respawn Coordinates" from being updated, except during certain cutscenes

Resources